Frecuent answers and questions about towbars


 When should I install a specific kit or universal one with module?
 

Whenever the vehicle incorporates any of the following electronic devices: Check-Control or CAN-BUS Cables thin section.It is mandatory to fit a specific kit or a universal module. In our printed and virtual catalog, we mark with the initials (CBD, CC, AS) the vehicles that have to install one of these 2 types of kits.


 Why install a specific electrical kit ?

Reliable connections. Conflicts are avoided with electronic management systems of the vehicle, allow the proper operation of the vehicle's electronic modules and the installation with the appropriate connectors for each vehicle. For those vehicles that do not incorporate complex electronic systems are easy to install, gaining in speed of assembly and connection reliability. Complete and detailed manual on how to install the kit.



 How to check if your vehicle has the Check-Control Systems?
  The fastest and most accurate way to verify this is:

1. Remove a brake lamp of one of the rear lights

2. Switch on  the vehicle's engine, step on  the brake pedal
3. Check for an error message on the dashboard of the vehicle or hear a failure sound


 How to obtain continuous electrical current for the caravan?
It would only be possible with the installation of a 13 poles kit

 How to check if the kit is appropriate for the vehicle?
Get in touch with our sales department (+34 976 144 401), tell us which model of vehicle needs the specific kit, we will directly advice you.

 How to make the connection on the plug base?
Follow the assembly instructions attached with the Kit. If you have any doubts get in touch with our sales department

(+34 976 144 401 ) .

 

 When do I have to install a specific kit or universal one with module?
 PDC  
In some models of kit like for example our model UEK 13F and UEK 7F and depending on the vehicle where the installation will be made. It is important that you let us know if your vehicle is or not equipped with this device (PDC). In some models of vehicles it is possible the cancellation of the sensors through an installer serial switch.

 When do I need to use a 13 poles-7 poles adapter?
esquema de 13 a 7

When the plug base of your vehicle has 13 poles and the trailer or caravan that you are going to drag has a connection plug of 7 poles
adaptador de 13 polos a 7 polos

 When do I need to use a 7 poles -13 poles adapter?
esquema de 7 a 13 polos
When the plug base of your vehicle has 7 poles and the trailer or caravan that you are going to drag has a connection plug of 13 poles

WARNING: You will not have neither 12V nor reverse light on the trailer or caravan
 adaptador de 7 a 13 polos

 Why the cancellation of the fog lamp?
desactivacion luz antiniebla  With the cancellation of the rear lights of the vehicle we will avoid dazzling the driver when reflected at the front of the caravan or trailer, most specific kits and kits UEK (7F and 13F) are fitted so that this disconnection occurs automatically when the plug is connected.

 When do I have to install a specific kit or a universal one with module?
We have two types of electrical kit with signal amplification module in versions 7 and 13 poles:
Its main features are:
Installation is quick and easy. In most cases it is possible to disconnect the rear lights of the vehicle. We have versions of 7 and 13 poles.
Fits most vehicles fitted with electronic devices such as Can Bus Control or Check Control that exist in our catalog.
For more information please contact our Sales Department


 What does ESP mean?

The most technologically advanced vehicle models feature a vehicle stability system called ESP tractor. This system must be disabled from the dashboard of the vehicle when towing a trailer or caravan.
Búsqueda de productos
select
Please enter your username and password in the boxes below
Login
Password
 
MAPA WEB | CONDICIONES DE VENTA | AVISO LEGAL | KITS ELÉCTRICOS | ENGANCHES | REMOLQUES | PORTABICICLETAS | PORTAPERROS | PORTAEQUIPAJES
URBENI - ENGANCHES Y REMOLQUES - All rights reserved - Polígono Industrial CENTROVIA A2 E90, Km 303 C/. Buenos Aires, 10 | 50196 La Muela - Zaragoza (España)